Led bar PURELUX Panther Aero S1050 – Straight / 103 cm / 216W / Ref. 50

Description

Super slim and aerodynamic auxiliary light panel, which is equipped with e.g. with two different power modes, a wonderful combination beam and an orange and white parking light. Measured light output 16061 lm, measured range 653 m @ 1 lux.

PRODUCT DESCRIPTION – DELIVERY CONTENTS – TECHNICAL DATA

Two power modes (Purelux PowerBoost®)
A long-range combination beam
Pleasant 5000K color temperature
Aerodynamic and low structure

Stylish two-color parking light
Unprecedented size-performance ratio
Frameless Lexa polycarbonate lens
Easy attachment with end or bottom brackets

The Purelux Panther Aero S1050 Gen2 is an extremely slender and low-profile additional light designed to be part of heavier vehicles, such as e.g. equipping all-terrain vehicles and vans and trucks. Because of its length (1026 mm), this light is best installed on the roof of the vehicle, where the aerodynamics of the panel can be used. When mounted high, the panel’s light beam also opens very evenly from side to side of the road section that opens in front of the lights. Like all other Purelux Panther additional lights, this model is also equipped with two power modes: the light can be used either in the limited power mode approved for road traffic or in the Purelux PowerBoost® mode, which releases full power, where the lamp produces a measured light output of over 16,000 lumens and a range of 586 meters @ 1 lux measured range! Showy and high-performance light for the needs of demanding users!

Panther Aero S1050 Gen2 is not only high-performance, but also quite stylish and modern additional light. The panel includes e.g. two-color parking light (orange and white), stylish dark optics and a frameless lens that guarantees a finished appearance. All this, combined with the light’s low body (height only 42 mm), make the Purelux Panther Aero S1050 Gen2 a spectacular addition to any vehicle!

“Notorious Panther performance”

Unlike usual, you don’t need to connect or disconnect any extra wires to activate the lamp’s different power modes, instead switching between PowerBoost® and road mode is unprecedentedly easy by pressing the button at the end of the lamp. The power mode that was last used remains in the lamp’s “memory”, so you don’t have to e.g. in road traffic, make sure that the lamp always turns on at maximum power, when the power is switched off in between and the car starts moving again.

Note! You can clearly see the difference between Purelux PowerBoost® and road traffic mode – PowerBoost® mode is significantly more efficient and should not be used when driving in normal road traffic, only off-road.

The beam of the Panther Aero S1050 Gen2 consists of a rectangular wide main beam, which is the perfect combination of both range and width. The panel directs the light both far ahead and laterally to a wide area, so that even the edges of the road can be illuminated effectively right from the bow. In the vertical direction, the light beam is softly defined, which is why it is especially optimal for bow installations. Despite the height-limited beam, there is still enough light for driving on hilly terrain and for roof installations.

The differences between the curved and straight Panther can be found in the light beam: in both models, the beam is sufficient to illuminate the entire road from side to side, but in the curved panel, the main beam is approx. 50% wider, and it is also slightly narrower in the vertical direction than in the straight model. The efficiently lit area is therefore wider in the curved model, while the straight model maximizes the range of the spotlight. If the goal is to find the widest possible light pattern, a curved panel is the right choice, and if the range is a bit more, the straight model is the right choice. Because in the curved model the spotlight is straighter at the top and bottom, it is a slightly better option for really low installations.

In addition to the precisely finished light beam, a feature that significantly improves the driving experience is the light’s neutral color temperature of 5000 Kelvin. Neutral color temperature is optimal for road traffic, as it facilitates the observation of terrain shapes and obstacles, and it does not distort the color of objects. In addition, it dazzles, e.g. less cool tones from snow cover or in fog and rain, and reduces the strain on the eyes. The 5000K color temperature perfectly suits newer cars with LED or Xenon lights as standard, and brings the desired brightness and sharpness even alongside traditional halogen lights.

The Panther Aero S1050 Gen2’s aerodynamics, stylish black profile, dark optics, and the orange or white parking light running beautifully at the bottom of the light make the panel a finished and modern addition to any vehicle. In addition to visibility and great lighting properties, the lamp is also very durable, as evidenced by e.g. its highest possible tightness rating IP69K. The body of the lamp is made of powder-coated aluminum, which has been treated with a special coating that is excellently resistant to oxidation, the sun’s harmful UV rays, variable weather conditions and also protects against dirt. The lens of the lamp is impact-resistant and high-quality Lexa polycarbonate, which can withstand the inevitable stone blows and scratches from branches when driving. The front of the light is designed completely flat, meaning there is no frame around the lens that collects snow, ice or dirt.

“Purelux Panther series is made with uncompromising quality and top of the line performance. Every feature is finely tuned to fit any type of situation and vehicle. Don’t hesitate, ride with the Panther!” – Purelux

The light comes with both the traditional end legs and the width-adjustable rail mounts below the light, so it can be easily attached to different objects. The wide operating voltage range (9-36 V) enables connection to both 12V and 24V systems, and the light’s reference number (50) enables installation alongside practically all standard lights without removing the original lights from use! In addition, the lamp is protected against radio interference in accordance with the ECE R10 standard. Two-year (24 months) warranty!

Valostore’s comment on the Purelux Panther Aero series: “A very attractive and elegant additional light series, with a suitable size model for every object. The low design of the panels allows installation even in tight spaces, for example behind the mask, if you want the installation to be as inconspicuous as possible. Stylish and modern, the appearance with parking lights works of course also in visible installation locations, and thanks to their low air resistance, the lights are also suitable for ceiling installation. Each model in the series is extremely tough in terms of size-power ratio, and their very pleasant combination beam with a color temperature of 5000 Kelvin is as if made for the dark roads of Finland. Of course, it is also worth noting that the power mode of the lamps can be changed simply by pressing a button!”

Basic delivery content
Purelux Panther Aero S1050 Gen2
2 x Width-adjustable lower legs
2 x End feet
Connection and installation instructions (FI/SE/NO/DK/EN)
Delivery contents (Led bar + Wiring harness)
Basic delivery content
Wiring harness with relay Purelux HD, 12V
Note! Due to the high power, there are no connectors on the led bar or relay cable kit; you must make the connections yourself.
Specifications
Brand and model: Purelux Panther Aero S1050 Gen2
Purpose: As an additional light in cars / Off-Road vehicles / work machines
LED: 36 x 6W
Operating voltage: 9-36 V (DC)
Reference number: 50
Calculated power: 216 W
Power consumption measured by Valostore
Purelux PowerBoost®: 8.6A @ 24V
Road mode: 6.33A @ 12V / 2.79A @ 24V
Power measured by Valostore
Purelux PowerBoost®: 206W @ 24V
Road mode: 76 W @ 12V / 67 W @ 24V
Light output declared by the manufacturer: 15500 lm (Purelux PowerBoost®)
Measured by Valostore: 16061 lm (Purelux PowerBoost®)
Measured by Valostore: 6399 lm (Traffic condition)
Range declared by the manufacturer: 684 m @ 1 lux (Purelux PowerBoost®) / 468 m @ 1 lux (Road traffic mode)
Measured by Valostore: 653 m @ 1 lux / 1307 m @ 0.25 lux / (Purelux PowerBoost®)
Measured by Valostore: 375 m @ 1 lux / 751 m @ 0.25 lux (Traffic mode)
Color temperature stated by the manufacturer: 5000 K
Measured by Valostore: 5020 K
Fastening: End legs, width-adjustable lower legs
Connector: Straight wires, no connector
The parking lights + wires are separate
Cable length: 220 cm
Dimensions: 1026 x 42 x 62.5 mm (Width x Height x Depth)
Height with end legs: 57 mm
Height with lower legs: 62 mm
Weight: 3100 g
IP rating: IP68/IP69K
Approvals: CE, ECE R10, R7, R112*
*Road traffic approval does not apply to PowerBoost® mode
Warranty: 24 months
Importer: Handshake.fi
Installation guide

You can find the manufacturer’s connection and installation instructions (FI/SE/NO/DK/EN) by clicking here.