LED puck set LIGHT5 Smart Flare Kit

Description

A set of six smart LED light pucks and a charging case for authorities, construction sites, hobbies or home use. The flares have 6 different flashing functions, shock-, dust- and water-resistant construction. The pucks float in water!

The Light5 Smart Flare Kit is an LED light flare set consisting of six smart flares and a charging/storage/transport case designed for them. The flares are an incredibly versatile tool for official duties, construction sites, emergency vehicles or even as a decoration for your own home hot tub. The flares are equipped with an eye-catching orange light, have 6 different flashing functions, are shock-, dust- and water-resistant, withstand both frost and heat, and even float in water. When switched on, the flares automatically synchronize with each other, allowing you to change the operating modes of all flares via one flare. The flares operate on a built-in 2400 mAh battery and can be charged wirelessly by placing them in the storage slots in the case. When the flare is removed from the case, it is automatically activated, and correspondingly it also automatically turns off when it is placed back in the case – really easy!

By pressing a button, you can choose whether the LEDs on the side or on top of the puck are lit. If the puck is mounted, for example, on the roof of a car, it can be set to flash the LEDs on the side (illuminating sideways), or if the puck is mounted in a vertical position, for example behind a car, it can be set to flash the LEDs on top of the puck (illuminating horizontally). The flares can be placed next to a car or, if necessary, in the middle of the road, because they can be driven over without any problems.

The Smart Flare currently offers a continuous operating time of up to 80 hours at a time, so for example when working, they do not need to be charged even at the end of each day. When the power runs out, the charging case charges the pucks from empty to full in about 10-12 hours, and even if the battery has not yet run out, the pucks are always charged while in the case. This means that if the pucks are stored in the case, for example at the end of the working day, the charging time is significantly shorter than mentioned above, and the pucks are guaranteed to always have power when they are next needed. The charging case itself weighs just over 3 kg and is equipped with a convenient carrying handle, which makes it easy to take with you everywhere. The case is made of durable ABS plastic, so it can withstand the inevitable impacts of work, for example.

Note! You can find spare flares here, another car charger here, and another wall charger here.

Delivery content
Charging/storage case
6 light pucks
AC adapter for briefcase
Car charger for briefcase
Instructions for use (FI/EN/SE/NO/DK)
Specifications
Product: Light5 Smart Flare Kit
Battery: Built-in 3.7V, 2400 mAh li-ion
Color of the light: Amber
Charging: Wireless charging in the case
Charging time: 10-12 hours
puck operating modes: 6 pcs
Dimensions:
pucks: 125 x 40 x 40 mm (Width x Height x Depth)
Briefcase: 275 x 370 x 120 mm (Width x Height x Depth)
Weight: 347 g (Puck) / 3200 g (Briefcase)
IP rating: IP67 (Wheels)
Impact resistance: 5 m (Wheels)
Operating temperature: -20°C – +60°C (Wheels)
Charging temperature: 0°C – +45°C
Storage temperature: -10°C – +45°C
Warranty: 12 months
Operating modes and times (specified by the manufacturer)
Pulse: 15 hours
Single: 80 hours
Slow: 30 hours
Quick: 60 hours
Double Slow: 36 hours
Double quick: 38 hours
Quick guide

Activation: The pucks are automatically activated when they are removed from the charging case. When the pucks are removed from the case, they establish a wireless connection with each other and automatically take the next place in the series. If you want to turn off the pucks, place them back in the charging case. The pucks will automatically activate in the last operating mode used.

Manual operation: Individual pucks can be activated and deactivated manually by pressing and holding the round ON/OFF button on the puck. The LED indicator next to the button will flash 10 times to indicate deactivation. Press the ON/OFF switch once to reactivate the puck. The puck will automatically synchronize with the activated pucks.

Modes: Press the round button on any active puck to change the mode of all pucks. If you want to change the puck’s light source (whether the LEDs on top or on the side of the puck are lit), press the square button on any puck.

Charging: Charge the pucks by placing them in the charging case with the ON/OFF button facing away from the case. The chargers are stored in the charging case compartment, select the correct charger according to the power source. Lift the rubber cover of the DC port on the charging case and connect the charger cable plug to the port. Connect the charger to the power source. The LED indicator on the pucks will light up red to indicate charging and turn green when charging is complete.

Note: The pucks cannot be charged outside of the charging case provided. Only use the chargers provided with the product.

You can find the manufacturer’s user manual by clicking here.