Warning light PURELUX Strobe Ultra Slim – 12/24V / 8W / 96 mm

Description

Slim and stylish warning light equipped with orange LEDs, intended for work machines and other heavy equipment! 8 different operating modes, multiple lights can be synchronized! Approved for road traffic, suitable for 12V and 24V systems, 24 month warranty!

Purelux Strobe Ultra Slim 8W is a stylish and recessed warning/strobe light, which has been designed as part of the equipment for heavy equipment and work machines. Strobe Ultra Slim Square is suitable for mounting on e.g. rear, side or bumper of the vehicle. Thanks to its thin fixture and design, the Strobe Ultra Slim fits neatly and discreetly into the vehicle. Purelux Strobe Ultra Slim is equipped with four orange 5W LEDs with up to 8 different operating modes.

Purelux Strobe Ultra Slim is approved for use in road traffic according to the ECE R65XA1 class, which means that it can also be used for road works in traffic. Thanks to the wide operating voltage, the lamp can be connected to both 12V and 24V systems. The elegant appearance combined with the small size ensures that the warning light fits practically all vehicles. Strobe Ultra Slim Square is also protected against radio interference according to R10 class. Two year (24 month) warranty!

If desired, several lamps can be connected together to work together, then the lamps are synchronized with each other. In this way, the warning lights can be made to flash in the same operating mode at the same time, so that the lighting is uniform. The lamps can be synchronized with each other by connecting the yellow wires coming from the lamp. If the white wires in addition to the yellow one are connected to the power (+) of some of the lights, they are always lit when the others (the ones that do not have the white wire connected) are off and vice versa. In this way, the lights can also be synchronized so that they flash at different speeds, i.e. alternately. In this case, for example, half of a large number of lights can be made to flash at a different time than the other half. Of course, this can also be activated with only two lights.

The Purelux Strobe Ultra Slim can also be synced with the models below:

Purelux Strobe Ultra Slim – 12W 12/24V
Purelux Strobe Ultra Slim – 15W 12/24V
Content
Purelux Strobe Ultra Slim 8W
Mounting screws
Connection and installation instructions (EN)
Technical specification
Brand and model: Purelux Strobe Ultra Slim 8W
Area of use: As a warning and attention light
LED: 4 x 5 W
Light colour: Orange
Operating voltage: 10 – 30V
Manufacturer’s reported power: 8W
Operating modes: 8
Dimensions: 96 x 25 x 7.5 mm (Length x Width x Depth)

CC dimensions: 89 mm (distance between attachment points)
Weight: 45 g
Cable length: approx. 50 cm
Approvals: EMC: ECE: R10, R65XA1
Protection class: IP67
Warranty: 24 months
Importer: Handshake.fi
Operating modes
Single (R65 Default)
Double, fast (R65)
Double, slow
Quad
Combo, Sinlgle-Double
Combo, Sinle-Quad
Breathe
Constant
Quick guide

Coupling

Red: Power (+)
Black: Ground (-)
Yellow: Synchronization, change of operating mode, reset
Synchronization: select the same operating mode for the lamps to be synchronized, then connect the yellow wires to the lamps. In this way, the lamps flash in the same rhythm and change operating mode (all together) when the operating mode of a lamp changes.
Change operating mode: Apply power (+) to the yellow wire, the lamp will change operating mode. Can be implemented with a circuit breaker (the cable is connected to the battery or other power source, and a pressure switch is inserted in between)
White: Alternate sync
Alternating synchronization: If the white wires of some of the lights besides the yellow one are connected to the power (+), they are always lit when the others (white wires not connected) are off and vice versa. In this way, the lights can also be synchronized so that they blink at different rates.

Manufacturer’s manual: Purelux Strobe Ultra Slim -manual (opens in a new window).