Remote-controlled wiring harness PURELUX, 12/24V

Description

Remote-controlled relay cable kit intended for the installation of 1-2 additional lights, which allows the additional lights to be controlled wirelessly without a wired switch. With the remote control, the additional lights can be turned on and off or set to flash, so they act as attention lights. Suitable for 12/24V voltage, max. load 300W.

ATTENTION! The Purelux relay cable set is also suitable for installing additional lights other than the Purelux!

The Purelux remote relay wiring kit is an easy solution for installing one or two additional lights, such as work lights and hazard lights. The wiring kit allows you to control the connected auxiliary lights from inside or around the car without pulling the wired switch into the driver’s cab, so both installation and use are very easy and convenient! With the included remote control, either one or both auxiliary lights can be turned on or off in the traditional way, plus they can also be set to flash at the touch of a button! This relay cable kit therefore enables both normal use of the auxiliary lights and also enables the use of steadily shining work lights and warning lights as flashing lights without additional connections, even if they do not have a flashing function. There are six different flashing functions in the switch kit, which change with each press of the remote control. The functions can be scrolled while the auxiliary lights are on, so you can immediately see which function is activated.

The cable kit contains everything you need for installation: the cable kit itself, a remote control, four flat connectors and installation and connection instructions are included. The wiring kit has two outputs, so it can be used to install one or two additional lights, the wires have ready-made abiko connectors for connection. Suitable for use in both 12V and 24V systems, withstands a total load of 300W.

Technical specification
Make and model: Remote-controlled relay cable set Purelux 12/24V
Area of use: For remote control of additional lights, work lights, warning lights, etc.
Voltage: 10-30 V
Contact: 2 x Abiko
Max load: 300 W
Fuse: 25A
2 outputs
Cable length from relay to additional light: 300 cm
Cable length from battery to relay: 50 cm
Remote control battery: CR2032
Remote control range: 60 – 80 m
IP-rating: IP65 (remote control and control box)
Warranty: 12 months
Coupling

Manufacturer’s operating and installation instructions: Remote-controlled wiring harness Purelux, 12/24V -manual (opens in a new window).